What Should I Do To Winterize My Pipes?November 21, 2022 12:00 am Leave your thoughts
Preparing your pipes for winter is something you should do to keep your system functioning well if you leave the home vacant for an extended period. This process is called winterizing your homes plumbing, and it’s a great way to protect your pipes. These are some tips that will help you with winterization:
1. Find the Valves and Shut Them Off
The point of winterizing the pipes is to remove excess water from the system and stop new water from getting in. If you don’t do this, the water inside the pipes can freeze, and damage can happen to the pipes once the water turns into ice and expands. Thus, step one is turning off the main supply of water, and step two is turning off the water pump. Lastly, you’ll need to turn off the hot water heater.
2. Open Taps and Drain Valves
Next, you will need to go around and open all of the taps and drain valves. This step will release any water that might still be stuck in the system.
3. Blow Out the Pipes
After you open the valve and taps, you will need to use an air compressor to blow air through the pipes. In this step, you get rid of all the excess water inside the pipes.
4. Drain the Hot Water Tank
Your hot water tank should have a valve on it, and you will need to open that to allow the water to run out of it until it’s empty.
5. Empty the Holding Tank
The next thing to do is to drain whatever water is in the holding tank. You can add a little bit of antifreeze to the jet pump case if you need to do so for additional protection.
6. Empty the Toilet
Do your best to empty all the water out of the toilet. You can do that by simply flushing the toilet. As a protective measure, you can add antifreeze to the water to prevent any remaining water from freezing. The freezing of such water could crack the toilet, which is what you’re trying to avoid. The added antifreeze will give the water the elements it needs to make it unfreezable.
7. Antifreeze the Tubs and Sinks
Next, you will need to walk around and check the tubs and sinks for traps. Add antifreeze to stop the leftover water from freezing.
You should also take some steps to winterize your pipes. Examples of things you can do are insulating them, keeping a heat source near them, and keeping faucets dripping. The drip technique allows water to flow constantly through the pipe, which makes it resistant to freezing.
Don’t hesitate to contact an established service provider if you feel that you cannot effectively protect your pipes or perform the processes mentioned above. Plumbing companies will be delighted to provide such services to you. You’ll hear more about pricing and service details when you contact this provider and ask for their assistance.
Categorised in: Winterization
This post was written by admin